Potrebni materijali

Gladak, plosnat kamen (veličine dlana)
Zelena akrilna boja
Crna akrilna boja
Bijela akrilna boja
Fini kist za detalje
Pljosnati kist (srednji)
Prozirni lak u spreju
Olovka

Korak po korak uputstva

1

Korak 1: Paint the dark background and plan the design

Wash and dry your rock. Paint the entire surface black or very dark green. Let dry. Print a Celtic knot reference image (a simple triquetra or interlace knot). Transfer the design by sketching it with pencil directly on the dark painted rock. Take your time — Celtic knots require precise planning.

2

Korak 2: Paint the knot ribbon strands

Using forest green paint and your fine brush, carefully paint the ribbon strands of the Celtic knot following your pencil lines. Celtic knots consist of continuous interlacing ribbons that loop over and under each other. Keep each ribbon about the same width throughout.

3

Korak 3: Create the over-under weaving effect

The most important part of a Celtic knot is showing which strand passes over and which passes under. At each crossing point, one strand is continuous and one is interrupted. Paint the "over" strand as a solid line, and leave a small gap in the "under" strand where they cross. Use slightly darker green in the gap areas.

4

Korak 4: Add highlights and shading to the ribbons

Using light green paint, add a highlight line along the center or upper edge of each ribbon strand. This shading suggests that the ribbons are three-dimensional bands, not flat lines. Use darker green for the shaded edges. Gold outlines along the ribbon edges add richness.

5

Korak 5: Add gold outlines and seal

Using gold paint and your finest brush, carefully outline the outer edges of all ribbon strands. This gold border makes the Celtic knot look like illuminated manuscript artwork. Apply clear sealant to protect your intricate Celtic design.

Korak 6: Dodajte RoxGeo kod

Na dnu ili poleđini svoje stijene napišite ROXGEO.COM nakon čega slijedi kosa crta i jedinstveni kod vašeg kamena (npr. ROXGEO.COM/ABC123). Ovo omogućava pronalazaču da ode direktno na stranicu profila vašeg kamena i zabilježi svoje otkriće. Ako je kamen premali za punu adresu, napišite #ROX i šifru bez razmaka (npr. #ROXABC123) — kratak je, lak za pretraživanje na Google-u i vodi pravo na stranicu vašeg putovanja. Koristite trajni marker sa finim vrhom ili akrilnu olovku i zapečatite ga prozirnim lakom kako bi kod ostao čitljiv kroz kišu, sunce i avanturu.

Korisni savjeti

Nacrtaj motiv olovkom prije bojenja.
Pustite svaki sloj da se potpuno osuši prije dodavanja sljedeceg.
Odaberi oblik kamena koji odgovara tvom motivu.
Zapečati prozirnim sprejem da kamen ostane lijep i na otvorenom.
Za RoxGeo kod na dnu koristite vodootporni trajni marker (poput Sharpie) ili akrilnu olovku. Nanesite 2-3 sloja prozirnog zaptivača preko koda - to ga održava čitljivim kroz kišu, sunce i rukovanje mjesecima.
Ako napišete #ROXCODE (npr. #ROXABC123) na svom kamenu, možete ga lako pronaći putem Google pretrage. Aktivno optimiziramo za ovaj hashtag, tako da će svako ko ga traži brzo pronaći stranicu profila vašeg rocka.
Puna adresa ROXGEO.COM/CODE vodi pronalazač direktno na karticu vašeg kamena, gdje mogu vidjeti njegovu punu istoriju putovanja, prethodne pronalazače i fotografije sa svake stanice na svom putovanju.

Obojite ovaj kamen i pratite njegovo putovanje uz RoxGeo!

Preuzmite RoxGeo besplatno