Potrebni materijali

Gladak, izduženi plosnat kamen
Crna akrilna boja
Tamno plava akrilna boja
Bijela akrilna boja
Žuta akrilna boja
Plava akrilna boja
Pljosnati kist (srednji)
Fini kist za detalje
Prozirni lak u spreju

Korak po korak uputstva

1

Korak 1: Paint the pitch-dark abyss

Wash and dry your rock. Paint the entire surface with near-black. While still wet, blend in deep navy blue in the upper areas to suggest the water column — darker at the bottom (deepest water) and slightly less dark higher up. The abyssal zone has no sunlight at all. Add a few scattered pinpoints of light for bioluminescent particles in the water column.

2

Korak 2: Sketch and paint the angler fish body

Sketch an anglerfish (deep sea fish) body — a wide, rounded head taking up most of the body, with a tapering tail. The anglerfish is the most recognizable deep sea creature. Paint the body in deep teal or dark gray-blue. Add a large, gaping mouth with massive jagged teeth in white — the teeth are a hallmark feature.

3

Korak 3: Paint the bioluminescent lure

On the top of the anglerfish's head, paint a long spine (illicium) extending forward and curving down in front of the mouth. At the tip, paint a small glowing bulb in bright cyan or neon blue-green with a white core. This is the esca — the bioluminescent lure the anglerfish uses to attract prey in the darkness.

4

Korak 4: Add bioluminescent body markings

Using neon green or bright cyan paint and a fine brush, add a series of glowing spots and curving line patterns along the body and fins of the anglerfish. These bioluminescent patterns suggest the photophores (light-producing organs) that many deep sea creatures use for communication and camouflage.

5

Korak 5: Add the glowing eye and seal

Paint a large, haunting deep-sea eye on the side of the anglerfish head — a wide greenish iris surrounding a large black pupil with a tiny white highlight. Add a glow halo around the entire fish using very diluted cyan paint. Apply gloss sealant. The wet, shiny finish makes the fish look submerged in water.

Korak 6: Dodajte RoxGeo kod

Na dnu ili poleđini svoje stijene napišite ROXGEO.COM nakon čega slijedi kosa crta i jedinstveni kod vašeg kamena (npr. ROXGEO.COM/ABC123). Ovo omogućava pronalazaču da ode direktno na stranicu profila vašeg kamena i zabilježi svoje otkriće. Ako je kamen premali za punu adresu, napišite #ROX i šifru bez razmaka (npr. #ROXABC123) — kratak je, lak za pretraživanje na Google-u i vodi pravo na stranicu vašeg putovanja. Koristite trajni marker sa finim vrhom ili akrilnu olovku i zapečatite ga prozirnim lakom kako bi kod ostao čitljiv kroz kišu, sunce i avanturu.

Korisni savjeti

Odaberi oblik kamena koji odgovara tvom motivu.
Nacrtaj motiv olovkom prije bojenja.
Pustite svaki sloj da se potpuno osuši prije dodavanja sljedeceg.
Zapečati prozirnim sprejem da kamen ostane lijep i na otvorenom.
Za RoxGeo kod na dnu koristite vodootporni trajni marker (poput Sharpie) ili akrilnu olovku. Nanesite 2-3 sloja prozirnog zaptivača preko koda - to ga održava čitljivim kroz kišu, sunce i rukovanje mjesecima.
Ako napišete #ROXCODE (npr. #ROXABC123) na svom kamenu, možete ga lako pronaći putem Google pretrage. Aktivno optimiziramo za ovaj hashtag, tako da će svako ko ga traži brzo pronaći stranicu profila vašeg rocka.
Puna adresa ROXGEO.COM/CODE vodi pronalazač direktno na karticu vašeg kamena, gdje mogu vidjeti njegovu punu istoriju putovanja, prethodne pronalazače i fotografije sa svake stanice na svom putovanju.

Obojite ovaj kamen i pratite njegovo putovanje uz RoxGeo!

Preuzmite RoxGeo besplatno