Potrebni materijali

Gladak, izduženi plosnat kamen
Smeđa akrilna boja
Bijela akrilna boja
Crna akrilna boja
Pljosnati kist (srednji)
Fini kist za detalje
Prozirni lak u spreju
Olovka

Korak po korak uputstva

1

Korak 1: Sketch the deer silhouette

Wash and dry your rock. Using a pencil, lightly sketch the deer as a full face portrait or a side profile depending on your rock shape. For a face portrait, draw a wide oval head, large ears on each side, and branching antlers at the top. Mark a smaller oval for the white muzzle area.

2

Korak 2: Paint the base coat

Paint the entire head and ears with warm brown paint. Apply two coats for an even base. Fill the muzzle oval with a lighter tan or cream color. Let each section dry before moving to the next. The contrast between the brown and cream creates the natural deer coloring.

3

Korak 3: Paint the antlers

Using dark brown paint and your fine brush, paint two branching antlers rising from the top of the head. Start with the main beam going up and slightly outward, then add two to three tines branching from each beam. Keep the lines thin and organic-looking, wider at the base and tapering to points.

4

Korak 4: Add the face details

Paint two large dark brown eyes with small white highlight dots. Add a small oval black nose at the tip of the muzzle. Draw a subtle mouth line. Add darker shading inside the ears and along the jaw for dimension. Use a slightly darker brown for the sides of the face to create depth.

5

Korak 5: Add spots and seal

For a fawn look, use white paint and a toothpick to add small scattered spots along the back and sides of the neck. These white spots are typical of young deer. Once everything is fully dry, apply clear sealant to protect your nature-inspired rock.

Korak 6: Dodajte RoxGeo kod

Na dnu ili poleđini svoje stijene napišite ROXGEO.COM nakon čega slijedi kosa crta i jedinstveni kod vašeg kamena (npr. ROXGEO.COM/ABC123). Ovo omogućava pronalazaču da ode direktno na stranicu profila vašeg kamena i zabilježi svoje otkriće. Ako je kamen premali za punu adresu, napišite #ROX i šifru bez razmaka (npr. #ROXABC123) — kratak je, lak za pretraživanje na Google-u i vodi pravo na stranicu vašeg putovanja. Koristite trajni marker sa finim vrhom ili akrilnu olovku i zapečatite ga prozirnim lakom kako bi kod ostao čitljiv kroz kišu, sunce i avanturu.

Korisni savjeti

Odaberi oblik kamena koji odgovara tvom motivu.
Nacrtaj motiv olovkom prije bojenja.
Pustite svaki sloj da se potpuno osuši prije dodavanja sljedeceg.
Zapečati prozirnim sprejem da kamen ostane lijep i na otvorenom.
Za RoxGeo kod na dnu koristite vodootporni trajni marker (poput Sharpie) ili akrilnu olovku. Nanesite 2-3 sloja prozirnog zaptivača preko koda - to ga održava čitljivim kroz kišu, sunce i rukovanje mjesecima.
Ako napišete #ROXCODE (npr. #ROXABC123) na svom kamenu, možete ga lako pronaći putem Google pretrage. Aktivno optimiziramo za ovaj hashtag, tako da će svako ko ga traži brzo pronaći stranicu profila vašeg rocka.
Puna adresa ROXGEO.COM/CODE vodi pronalazač direktno na karticu vašeg kamena, gdje mogu vidjeti njegovu punu istoriju putovanja, prethodne pronalazače i fotografije sa svake stanice na svom putovanju.

Obojite ovaj kamen i pratite njegovo putovanje uz RoxGeo!

Preuzmite RoxGeo besplatno