Potrebni materijali

Velik, plosnat kamen
Plava akrilna boja
Zelena akrilna boja
Razne jarke akrilne boje
Crna akrilna boja
Bijela akrilna boja
Pljosnati kist (srednji)
Fini kist za detalje
Prozirni lak u spreju

Korak po korak uputstva

1

Korak 1: Plan and sketch the peacock design

Wash and dry your large flat rock. With a pencil, sketch a peacock face and small body in the center-lower portion of the rock. Then sketch a large fan of tail feathers spreading outward and upward, filling most of the rock surface. Each feather should end in a large oval eye spot.

2

Korak 2: Paint the feather fan background

Paint the entire fan area with a base coat of teal or turquoise. While wet, blend touches of emerald green toward the edges and cobalt blue toward the center. This creates the iridescent shimmer of peacock feathers. Apply two coats for solid coverage.

3

Korak 3: Paint the eye spots on feathers

This is the signature feature of peacock feathers. For each feather tip, paint concentric ovals: the innermost is black, surrounded by a ring of gold, then a ring of teal or blue, then an outer ring of dark green. Add a tiny white highlight dot in the center of each black oval for brilliance.

4

Korak 4: Paint the peacock body and crest

Paint the small peacock body in the lower center with iridescent blue-green, using your cobalt blue and teal blended together. Paint a small fan crest on top of the head: a row of tiny circular-tipped feather spikes radiating upward from the head like a crown.

5

Korak 5: Add feather detail lines and seal

Using a fine brush and dark teal or black, draw thin radiating lines from the base to the eye spot on each feather. These lines suggest the barbs of real peacock feathers. Add gold outlines around each eye spot for richness. Once fully dry, apply clear sealant.

Korak 6: Dodajte RoxGeo kod

Na dnu ili poleđini svoje stijene napišite ROXGEO.COM nakon čega slijedi kosa crta i jedinstveni kod vašeg kamena (npr. ROXGEO.COM/ABC123). Ovo omogućava pronalazaču da ode direktno na stranicu profila vašeg kamena i zabilježi svoje otkriće. Ako je kamen premali za punu adresu, napišite #ROX i šifru bez razmaka (npr. #ROXABC123) — kratak je, lak za pretraživanje na Google-u i vodi pravo na stranicu vašeg putovanja. Koristite trajni marker sa finim vrhom ili akrilnu olovku i zapečatite ga prozirnim lakom kako bi kod ostao čitljiv kroz kišu, sunce i avanturu.

Korisni savjeti

Odaberi oblik kamena koji odgovara tvom motivu.
Nacrtaj motiv olovkom prije bojenja.
Pustite svaki sloj da se potpuno osuši prije dodavanja sljedeceg.
Zapečati prozirnim sprejem da kamen ostane lijep i na otvorenom.
Za RoxGeo kod na dnu koristite vodootporni trajni marker (poput Sharpie) ili akrilnu olovku. Nanesite 2-3 sloja prozirnog zaptivača preko koda - to ga održava čitljivim kroz kišu, sunce i rukovanje mjesecima.
Ako napišete #ROXCODE (npr. #ROXABC123) na svom kamenu, možete ga lako pronaći putem Google pretrage. Aktivno optimiziramo za ovaj hashtag, tako da će svako ko ga traži brzo pronaći stranicu profila vašeg rocka.
Puna adresa ROXGEO.COM/CODE vodi pronalazač direktno na karticu vašeg kamena, gdje mogu vidjeti njegovu punu istoriju putovanja, prethodne pronalazače i fotografije sa svake stanice na svom putovanju.

Obojite ovaj kamen i pratite njegovo putovanje uz RoxGeo!

Preuzmite RoxGeo besplatno