Voltar aos modelos
Pintura de Dente-de-leão em Pedra
Materiais necessários
- Pedra plana e lisa (tamanho da palma)
- Tinta acrílica preta
- Tinta acrílica branca
- Tinta acrílica amarela
- Pincel chato médio
- Pincel fino para detalhes
- Spray selante transparente
Guia passo a passo
1
Passo 1: Paint the dark background
Wash and dry your rock. Paint the entire surface with deep navy blue or black paint. Apply two coats for a solid dark background. The contrast between the dark background and white dandelion seeds will be the most striking element of this design.
2
Passo 2: Paint the stem and seed head
Paint a thin, slightly curved green stem in the lower center of the rock. At the top, paint a small circle in white or light gray for the base of the dandelion seed head. This circle is where all the seed stems radiate from.
3
Passo 3: Paint the radiating seed stems
Using your finest brush and white paint, paint thin lines radiating outward in all directions from the center circle, like spokes on a wheel but curved outward and varying in length. These are the delicate seed stems. Work around the full sphere from center to edge. Keep the lines thin and organic.
4
Passo 4: Add the parachute tufts
At the tip of each seed stem, paint a tiny star or feathery tuft shape using white paint and your toothpick. Each dandelion seed has a tiny umbrella-like parachute at its tip. Add four to six tiny radiating lines at the end of each stem. Some stems can have slightly larger tufts.
5
Passo 5: Add floating seeds and seal
Use your toothpick to dot three to five individual dandelion seeds drifting away from the main flower — tiny dots with miniature tufts suggesting the seeds being carried by the wind. Once everything is dry, apply clear sealant.
Passo 6: Adicionar código RoxGeo
Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.
Dicas úteis
- Escolhe uma pedra cujo formato se adeque ao teu tema.
- Uma camada base branca realça todas as cores.
- Deixa cada camada secar completamente antes de adicionar a seguinte.
- Aplica spray selante transparente para proteger a pedra no exterior.
- Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
- #ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
- O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.
Pinte esta pedra e rastreie sua viagem com RoxGeo!
Baixar RoxGeo grátis
