Materiais necessários

Pedra comprida e plana
Tinta acrílica castanha
Tinta acrílica branca
Tinta acrílica preta
Pincel chato médio
Pincel fino para detalhes
Spray selante transparente
Lápis

Guia passo a passo

1

Passo 1: Sketch the deer silhouette

Wash and dry your rock. Using a pencil, lightly sketch the deer as a full face portrait or a side profile depending on your rock shape. For a face portrait, draw a wide oval head, large ears on each side, and branching antlers at the top. Mark a smaller oval for the white muzzle area.

2

Passo 2: Paint the base coat

Paint the entire head and ears with warm brown paint. Apply two coats for an even base. Fill the muzzle oval with a lighter tan or cream color. Let each section dry before moving to the next. The contrast between the brown and cream creates the natural deer coloring.

3

Passo 3: Paint the antlers

Using dark brown paint and your fine brush, paint two branching antlers rising from the top of the head. Start with the main beam going up and slightly outward, then add two to three tines branching from each beam. Keep the lines thin and organic-looking, wider at the base and tapering to points.

4

Passo 4: Add the face details

Paint two large dark brown eyes with small white highlight dots. Add a small oval black nose at the tip of the muzzle. Draw a subtle mouth line. Add darker shading inside the ears and along the jaw for dimension. Use a slightly darker brown for the sides of the face to create depth.

5

Passo 5: Add spots and seal

For a fawn look, use white paint and a toothpick to add small scattered spots along the back and sides of the neck. These white spots are typical of young deer. Once everything is fully dry, apply clear sealant to protect your nature-inspired rock.

Passo 6: Adicionar código RoxGeo

Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.

Dicas úteis

Escolhe uma pedra cujo formato se adeque ao teu tema.
Esboça o design a lápis antes de começar a pintar.
Deixa cada camada secar completamente antes de adicionar a seguinte.
Aplica spray selante transparente para proteger a pedra no exterior.
Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
#ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.

Pinte esta pedra e rastreie sua viagem com RoxGeo!

Baixar RoxGeo grátis