Materiais necessários

Pedra alta e oval
Tinta acrílica vermelha
Tinta acrílica branca
Tinta acrílica azul
Tinta acrílica preta
Pincel chato médio
Pincel fino para detalhes
Spray selante transparente

Guia passo a passo

1

Passo 1: Paint the sky and sea background

Wash and dry your tall rock. Paint the upper portion with light blue for the sky and the lower portion with dark navy blue for the sea. Blend where they meet at the horizon. Paint gray rocky shapes at the very bottom for the cliff the lighthouse stands on.

2

Passo 2: Paint the lighthouse tower

Paint a tall, tapering white rectangle/cylinder rising from the rocky base, taking up about half the height of the rock. Lighthouses taper slightly from base to top. Add horizontal red stripes across the white tower at regular intervals — this is the classic lighthouse striped pattern.

3

Passo 3: Add the lantern room and light

At the top of the tower, paint a small round or octagonal lantern room section. Use gray for the frame and yellow for the glass. Above that, paint a tiny gallery railing with thin vertical and horizontal black lines. Add a beam of golden yellow light radiating outward from the lantern room across the sky.

4

Passo 4: Add windows and door

Paint small rectangular windows along the tower at intervals between the stripes. Add a small arched door at the base of the tower. Use dark blue or black for the window panes with a tiny white cross of light for a windowed effect.

5

Passo 5: Add sea details and seal

Add small white wave shapes on the sea surface with a fine brush. Add wispy white cloud shapes in the sky. Once everything is fully dry, apply clear sealant to protect your coastal lighthouse scene.

Passo 6: Adicionar código RoxGeo

Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.

Dicas úteis

Escolhe uma pedra cujo formato se adeque ao teu tema.
Esboça o design a lápis antes de começar a pintar.
Deixa cada camada secar completamente antes de adicionar a seguinte.
Aplica spray selante transparente para proteger a pedra no exterior.
Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
#ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.

Pinte esta pedra e rastreie sua viagem com RoxGeo!

Baixar RoxGeo grátis