Potrebni materiali

Gladek, podolgovat ploščat kamen
Črna akrilna barva
Temno modra akrilna barva
Bela akrilna barva
Rumena akrilna barva
Modra akrilna barva
Ploščati čopič (srednji)
Tanek čopič za podrobnosti
Bistri lak v spreju

Navodila po korakih

1

korak 1: Paint the pitch-dark abyss

Wash and dry your rock. Paint the entire surface with near-black. While still wet, blend in deep navy blue in the upper areas to suggest the water column — darker at the bottom (deepest water) and slightly less dark higher up. The abyssal zone has no sunlight at all. Add a few scattered pinpoints of light for bioluminescent particles in the water column.

2

korak 2: Sketch and paint the angler fish body

Sketch an anglerfish (deep sea fish) body — a wide, rounded head taking up most of the body, with a tapering tail. The anglerfish is the most recognizable deep sea creature. Paint the body in deep teal or dark gray-blue. Add a large, gaping mouth with massive jagged teeth in white — the teeth are a hallmark feature.

3

korak 3: Paint the bioluminescent lure

On the top of the anglerfish's head, paint a long spine (illicium) extending forward and curving down in front of the mouth. At the tip, paint a small glowing bulb in bright cyan or neon blue-green with a white core. This is the esca — the bioluminescent lure the anglerfish uses to attract prey in the darkness.

4

korak 4: Add bioluminescent body markings

Using neon green or bright cyan paint and a fine brush, add a series of glowing spots and curving line patterns along the body and fins of the anglerfish. These bioluminescent patterns suggest the photophores (light-producing organs) that many deep sea creatures use for communication and camouflage.

5

korak 5: Add the glowing eye and seal

Paint a large, haunting deep-sea eye on the side of the anglerfish head — a wide greenish iris surrounding a large black pupil with a tiny white highlight. Add a glow halo around the entire fish using very diluted cyan paint. Apply gloss sealant. The wet, shiny finish makes the fish look submerged in water.

korak 6: Dodajte kodo RoxGeo

Na spodnji ali zadnji strani kamna napišite ROXGEO.COM, ki mu sledi poševnica in edinstvena koda vašega kamna (npr. ROXGEO.COM/ABC123). To omogoča najditelju, da gre neposredno na stran s profilom vašega kamna in zabeleži svoje odkritje. Če je skala premajhna za polni naslov, napišite #ROX, ki ji sledi koda brez presledkov (npr. #ROXABC123) – je kratka, enostavna za iskanje v Googlu in vodi naravnost na stran potovanja vaše skale. Uporabite trajni flomaster s tanko konico ali akrilno barvno pisalo in ga zapečatite s prozornim lakom, da bo koda ostala berljiva v dežju, soncu in pustolovščini.

Koristni nasveti

Izberi obliko kamna, ki ustreza tvojemu motivu.
Skiciraj motiv s svinčnikom, preden začneš slikati.
Pustite vsak sloj popolnoma posušiti, preden dodate naslednjega.
Zapečati z bisatrim lakom, da bo kamen zdržal tudi zunaj.
Za kodo RoxGeo na dnu uporabite vodoodporen trajni flomaster (kot je Sharpie) ali akrilno pisalo. Čez kodo nanesite 2–3 sloje prozorne tesnilne mase — tako bo več mesecev berljiva v dežju, soncu in rokovanju.
Če na svoj kamen napišete #ROXCODE (npr. #ROXABC123), ga boste zlahka našli z Googlovim iskanjem. Aktivno optimiziramo ta hashtag, tako da bo vsakdo, ki ga išče, hitro našel stran s profilom vašega rocka.
Polni naslov ROXGEO.COM/CODE popelje najditelja neposredno na kartico vašega kamna, kjer si lahko ogleda celotno zgodovino potovanja, prejšnje najditelje in fotografije z vsakega postanka na njegovem potovanju.

Pobarvaj to skalo in sledi njeni poti z RoxGeo!

Prenesite RoxGeo brezplačno