所需材料

細長的扁平石頭
黑色壓克力顏料
深藍色壓克力顏料
白色壓克力顏料
黃色壓克力顏料
藍色壓克力顏料
中號平頭畫筆
細節畫筆
透明密封噴霧

逐步指導

1

步驟 1: Paint the pitch-dark abyss

Wash and dry your rock. Paint the entire surface with near-black. While still wet, blend in deep navy blue in the upper areas to suggest the water column — darker at the bottom (deepest water) and slightly less dark higher up. The abyssal zone has no sunlight at all. Add a few scattered pinpoints of light for bioluminescent particles in the water column.

2

步驟 2: Sketch and paint the angler fish body

Sketch an anglerfish (deep sea fish) body — a wide, rounded head taking up most of the body, with a tapering tail. The anglerfish is the most recognizable deep sea creature. Paint the body in deep teal or dark gray-blue. Add a large, gaping mouth with massive jagged teeth in white — the teeth are a hallmark feature.

3

步驟 3: Paint the bioluminescent lure

On the top of the anglerfish's head, paint a long spine (illicium) extending forward and curving down in front of the mouth. At the tip, paint a small glowing bulb in bright cyan or neon blue-green with a white core. This is the esca — the bioluminescent lure the anglerfish uses to attract prey in the darkness.

4

步驟 4: Add bioluminescent body markings

Using neon green or bright cyan paint and a fine brush, add a series of glowing spots and curving line patterns along the body and fins of the anglerfish. These bioluminescent patterns suggest the photophores (light-producing organs) that many deep sea creatures use for communication and camouflage.

5

步驟 5: Add the glowing eye and seal

Paint a large, haunting deep-sea eye on the side of the anglerfish head — a wide greenish iris surrounding a large black pupil with a tiny white highlight. Add a glow halo around the entire fish using very diluted cyan paint. Apply gloss sealant. The wet, shiny finish makes the fish look submerged in water.

步驟 6: 添加 RoxGeo 代碼

在你的石頭底部或背面寫上 ROXGEO.COM，接著加上斜線和你石頭的唯一代碼（例如 ROXGEO.COM/ABC123）。這樣尋找者就能直接訪問你石頭的個人資料頁面並記錄他們的發現。如果石頭太小無法寫下完整地址，可以寫 #ROX，接著是沒有空格的代碼（例如 #ROXABC123）——這樣簡短，容易在 Google 上搜尋，並直接引導到你石頭的旅程頁面。使用細尖的永久性標記筆或壓克力畫筆，並用透明清漆封住，這樣代碼在雨水、陽光和冒險中都能保持可讀。

有用的提示

選擇一塊形狀適合你設計主題的石頭。
在開始畫畫之前，先用鉛筆輕輕勾勒出設計。
在添加下一層之前，讓每一層完全乾燥。
用透明密封噴霧保護石頭，使其在戶外也能持久。
對於底部的 RoxGeo 代碼，使用防水永久性標記筆（如 Sharpie）或壓克力畫筆。在代碼上塗抹 2-3 層透明密封劑——這樣可以在雨水、陽光和處理中保持可讀數月。
在你的石頭上寫上 #ROXCODE（例如 #ROXABC123）可以讓人通過 Google 搜尋輕鬆找到。我們會主動優化這個標籤，因此任何搜尋它的人都能快速找到你石頭的個人資料頁面。
完整地址 ROXGEO.COM/CODE 會直接帶尋找者到你石頭的卡片，讓他們可以查看完整的旅行歷史、之前的尋找者和每個停留點的照片。

繪製這塊岩石並用 RoxGeo 追蹤它的旅程！

免費下載 RoxGeo