Voltar aos modelos
Pintura de Lançamento de Foguete em Pedra
Materiais necessários
- Pedra alta e oval
- Tinta acrílica azul escuro
- Tinta acrílica preta
- Tinta acrílica branca
- Tinta acrílica vermelha
- Tinta acrílica laranja
- Tinta acrílica amarela
- Pincel chato médio
- Pincel fino para detalhes
- Spray selante transparente
Guia passo a passo
1
Passo 1: Paint the sky-to-space gradient
Wash and dry your tall rock. Paint the entire surface with a gradient: light blue at the bottom (atmosphere), transitioning through darker blue toward the top, ending in near-black at the very top (space). This shows the rocket ascending from Earth's atmosphere into space. Let dry.
2
Passo 2: Sketch and paint the rocket body
Sketch a streamlined rocket shape in the center of the rock — a long cylindrical body tapering to a pointed nose cone at the top. Paint the body white with gray metallic shading. Add a red stripe or band around the middle. The nose cone can be red. Add small rectangular window portholes.
3
Passo 3: Paint the rocket fins and details
At the base of the rocket body, paint two or three swept-back stabilizer fins extending outward and downward. These fins are typically gray or red. Add a small national flag or mission patch on the side of the rocket using tiny details.
4
Passo 4: Paint the engine flames and exhaust
Below the rocket, paint dramatic engine flame plumes using bright yellow at the core, transitioning to orange, then red at the edges. The flames should taper downward into a point. Add a white-gray exhaust cloud billow at the base — this represents the smoke and steam released at launch.
5
Passo 5: Add stars, contrail, and seal
Add tiny white stars in the dark upper half of the rock. Add a thin white contrail line trailing behind and below the rocket. Apply clear sealant to protect your rocket launch rock — a celebration of human exploration and achievement.
Passo 6: Adicionar código RoxGeo
Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.
Dicas úteis
- Escolhe uma pedra cujo formato se adeque ao teu tema.
- Esboça o design a lápis antes de começar a pintar.
- Deixe cada camada secar completamente antes de adicionar a seguinte.
- Sele com spray transparente para proteger a pedra no exterior.
- Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
- #ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
- O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.
Pinte esta pedra e rastreie sua viagem com RoxGeo!
Baixar RoxGeo grátis
