Materiais necessários

Pedra redonda em forma de cúpula
Tinta acrílica branca
Tinta acrílica rosa
Tinta acrílica laranja
Tinta acrílica marrom
Pincel chato médio
Pincel fino para detalhes
Spray selante transparente

Guia passo a passo

1

Passo 1: Base coat and sketch the spiral

Wash and dry your rock. Paint the entire surface with cream or ivory paint. Let dry. Using a pencil, sketch the spiral of a nautilus shell — start with a small point at the center and draw an increasingly wide spiral working outward. The nautilus spiral is mathematically elegant: each chamber is larger than the previous.

2

Passo 2: Paint the spiral chambers

Paint the interior chambers of the shell in alternating warm tones: cream, peach, light pink, and tan. Each spiral section gets a different shade. The colors should flow naturally from warm peach at the center to cooler cream at the outer edge, creating a gradient across the chambers.

3

Passo 3: Add pearlescent shading

Using white paint slightly thinned with water, brush delicate highlights along the upper edge of each spiral chamber. This creates a pearlescent sheen that mimics the iridescent inner surface of real sea shells. Let it dry between the coats.

4

Passo 4: Draw the dividing lines

Using a fine brush and dark tan or light brown paint, carefully trace the dividing lines between each spiral chamber. These curved lines follow the spiral and separate the different-colored sections. They should be thin but visible, like the suture lines of a real nautilus.

5

Passo 5: Add outer shell details and seal

Paint the outer edge of the shell with a series of thin curved lines in tan and white to suggest the ridged texture of the shell exterior. Apply a gloss sealant for a beautiful pearlescent finish that mimics the real lustre of sea shells.

Passo 6: Adicionar código RoxGeo

Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.

Dicas úteis

Escolhe uma pedra cujo formato se adeque ao teu tema.
Esboça o design a lápis antes de começar a pintar.
Deixe cada camada secar completamente antes de adicionar a seguinte.
Sele com spray transparente para proteger a pedra no exterior.
Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
#ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.

Pinte esta pedra e rastreie sua viagem com RoxGeo!

Baixar RoxGeo grátis