Materiais necessários

Pedra plana e lisa (tamanho da palma)
Tintas acrílicas variadas brilhantes
Tinta acrílica branca
Esponja pequena (para texturas)
Pincel chato médio
Copo de água (para lavar o pincel)
Spray selante transparente

Guia passo a passo

1

Passo 1: Prepare the white base

Wash and dry your rock. If the rock is not naturally pale, paint the entire surface white and let it dry completely. The white base is crucial — it reflects light back through the translucent paint layers exactly as watercolor paper does, creating the characteristic luminous glow of watercolor painting.

2

Passo 2: Mix watered-down paints

Dilute each acrylic paint color with water to create very thin, transparent washes. The paint should be so thin you can almost see through it. Test on paper first — the color should leave a translucent tint, not a solid opaque layer. This dilution is the key to the watercolor effect.

3

Passo 3: Apply wet-on-wet washes

Wet the entire rock surface with clean water using your large brush. While still wet, drop or brush on large areas of color — teal in one area, pink in another, purple in another. The colors will bleed and blend into each other naturally at the wet edges, creating soft transitions like real watercolors.

4

Passo 4: Add detail layers when dry

Let the first wash dry completely. Then apply a second, slightly more concentrated wash of color in the center of each color area to deepen it. You can add small painted details: simple flowers, stars, leaves, or abstract shapes using a fine brush and more concentrated paint over the watercolor wash.

5

Passo 5: Add white details and seal

Using concentrated white paint and a fine brush, add small botanical details: tiny dots, simple leaf shapes, or a few small flowers over the colorful background. These white elements stand out beautifully against the soft washed colors. Apply clear sealant when dry.

Passo 6: Adicionar código RoxGeo

Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.

Dicas úteis

Uma camada base branca realça todas as cores.
Deixa cada camada secar completamente antes de adicionar a seguinte.
Escolhe uma pedra cujo formato se adeque ao teu tema.
Aplica spray selante transparente para proteger a pedra no exterior.
Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
#ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.

Pinte esta pedra e rastreie sua viagem com RoxGeo!

Baixar RoxGeo grátis