Materiales necesarios

Piedra plana y lisa (tamaño palma)
Pintura acrílica gris
Pintura acrílica negra
Pintura acrílica blanca
Pintura acrílica azul
Pintura acrílica roja
Pincel plano mediano
Pincel fino para detalles
Spray sellador transparente
Lápiz

Guía paso a paso

1

Paso 1: Paint the metallic robot body

Wash and dry your angular rock. Paint the entire surface with metallic silver paint. While still slightly wet, shade the edges and corners with darker gray to create a dimensional metal plate appearance. The rock should look like brushed steel or aluminum plating.

2

Paso 2: Add the robot face panel

Paint a rectangular panel in the upper portion of the rock for the robot face. Use slightly darker gray for this panel to define it from the body. Add two circular or rectangular eye lights in bright blue or cyan — these are the robot's sensors and visual indicators. Make them glow by adding white dots inside.

3

Paso 3: Add technical details and panels

Paint a series of smaller rectangular panels, ventilation grills, and technical markings on the lower body. Use thin black lines to create a panel-like grid pattern. Add small indicator lights — mix of red and blue dots — to suggest a control panel or status displays. Add gold or yellow circuit-line details.

4

Paso 4: Paint the robot mouth and antenna

Paint a rectangular mouth grille with vertical black lines for a speaker effect. Add small silver bolts or screws at the corners of the face panel. Paint a thin antenna rising from the top of the robot head with a small blinking red light at the tip.

5

Paso 5: Add reflective highlights and seal

Using white paint and a fine brush, add bright highlight lines along the upper and left edges of each panel to simulate light reflecting off a polished metal surface. These highlights give the robot a three-dimensional, real metal appearance. Apply clear sealant.

Paso 6: Agregar código RoxGeo

Escribe ROXGEO.COM seguido de una barra y el código único de tu piedra (ej. ROXGEO.COM/ABC123) en la parte inferior o trasera de tu piedra.

Consejos útiles

Elige una forma de piedra que se ajuste a tu diseño.
Esboza el diseño a lápiz antes de empezar a pintar.
Deja secar completamente cada capa antes de añadir la siguiente.
Sella con spray transparente para proteger tu piedra en exteriores.
Para el código RoxGeo en la parte trasera, usa un marcador permanente resistente al agua. Aplica 2-3 capas de barniz transparente encima.
Escribir #ROXCODE (ej. #ROXABC123) en tu piedra lo hace fácil de encontrar en Google.
La dirección completa ROXGEO.COM/CODE lleva al descubridor directamente al mapa de tu piedra.

¡Pinta esta piedra y rastrea su viaje con RoxGeo!

Descargar RoxGeo gratis