Materiales necesarios

Piedra redonda con forma de domo
Pintura acrílica blanca
Pintura acrílica rosa
Pintura acrílica naranja
Pintura acrílica café
Pincel plano mediano
Pincel fino para detalles
Spray sellador transparente

Guía paso a paso

1

Paso 1: Base coat and sketch the spiral

Wash and dry your rock. Paint the entire surface with cream or ivory paint. Let dry. Using a pencil, sketch the spiral of a nautilus shell — start with a small point at the center and draw an increasingly wide spiral working outward. The nautilus spiral is mathematically elegant: each chamber is larger than the previous.

2

Paso 2: Paint the spiral chambers

Paint the interior chambers of the shell in alternating warm tones: cream, peach, light pink, and tan. Each spiral section gets a different shade. The colors should flow naturally from warm peach at the center to cooler cream at the outer edge, creating a gradient across the chambers.

3

Paso 3: Add pearlescent shading

Using white paint slightly thinned with water, brush delicate highlights along the upper edge of each spiral chamber. This creates a pearlescent sheen that mimics the iridescent inner surface of real sea shells. Let it dry between the coats.

4

Paso 4: Draw the dividing lines

Using a fine brush and dark tan or light brown paint, carefully trace the dividing lines between each spiral chamber. These curved lines follow the spiral and separate the different-colored sections. They should be thin but visible, like the suture lines of a real nautilus.

5

Paso 5: Add outer shell details and seal

Paint the outer edge of the shell with a series of thin curved lines in tan and white to suggest the ridged texture of the shell exterior. Apply a gloss sealant for a beautiful pearlescent finish that mimics the real lustre of sea shells.

Paso 6: Agregar código RoxGeo

Escribe ROXGEO.COM seguido de una barra y el código único de tu piedra (ej. ROXGEO.COM/ABC123) en la parte inferior o trasera de tu piedra.

Consejos útiles

Elige una forma de piedra que se ajuste a tu diseño.
Esboza el diseño a lápiz antes de empezar a pintar.
Deja secar completamente cada capa antes de añadir la siguiente.
Sella con spray transparente para proteger tu piedra en exteriores.
Para el código RoxGeo en la parte trasera, usa un marcador permanente resistente al agua. Aplica 2-3 capas de barniz transparente encima.
Escribir #ROXCODE (ej. #ROXABC123) en tu piedra lo hace fácil de encontrar en Google.
La dirección completa ROXGEO.COM/CODE lleva al descubridor directamente al mapa de tu piedra.

¡Pinta esta piedra y rastrea su viaje con RoxGeo!

Descargar RoxGeo gratis