Volver a plantillas
Pintura de Diente de León en Piedra
Materiales necesarios
- Piedra plana y lisa (tamaño palma)
- Pintura acrílica negra
- Pintura acrílica blanca
- Pintura acrílica amarilla
- Pincel plano mediano
- Pincel fino de detalle
- Spray sellador transparente
Guía paso a paso
1
Paso 1: Paint the dark background
Wash and dry your rock. Paint the entire surface with deep navy blue or black paint. Apply two coats for a solid dark background. The contrast between the dark background and white dandelion seeds will be the most striking element of this design.
2
Paso 2: Paint the stem and seed head
Paint a thin, slightly curved green stem in the lower center of the rock. At the top, paint a small circle in white or light gray for the base of the dandelion seed head. This circle is where all the seed stems radiate from.
3
Paso 3: Paint the radiating seed stems
Using your finest brush and white paint, paint thin lines radiating outward in all directions from the center circle, like spokes on a wheel but curved outward and varying in length. These are the delicate seed stems. Work around the full sphere from center to edge. Keep the lines thin and organic.
4
Paso 4: Add the parachute tufts
At the tip of each seed stem, paint a tiny star or feathery tuft shape using white paint and your toothpick. Each dandelion seed has a tiny umbrella-like parachute at its tip. Add four to six tiny radiating lines at the end of each stem. Some stems can have slightly larger tufts.
5
Paso 5: Add floating seeds and seal
Use your toothpick to dot three to five individual dandelion seeds drifting away from the main flower — tiny dots with miniature tufts suggesting the seeds being carried by the wind. Once everything is dry, apply clear sealant.
Paso 6: Agregar código RoxGeo
Escribe ROXGEO.COM seguido de una barra y el código único de tu piedra (ej. ROXGEO.COM/ABC123) en la parte inferior o trasera de tu piedra.
Consejos útiles
- Elige una forma de piedra que se ajuste a tu diseño.
- Una capa base blanca hace que todos los colores se vean más vivos.
- Deja secar completamente cada capa antes de añadir la siguiente.
- Sella con spray transparente para proteger tu piedra en exteriores.
- Para el código RoxGeo en la parte trasera, usa un marcador permanente resistente al agua. Aplica 2-3 capas de barniz transparente encima.
- Escribir #ROXCODE (ej. #ROXABC123) en tu piedra lo hace fácil de encontrar en Google.
- La dirección completa ROXGEO.COM/CODE lleva al descubridor directamente al mapa de tu piedra.
¡Pinta esta piedra y rastrea su viaje con RoxGeo!
Descargar RoxGeo gratis
