Materiales necesarios

Piedra plana y lisa (tamaño palma)
Pinturas acrílicas variadas y brillantes
Pintura acrílica negra
Pintura acrílica blanca
Pincel plano mediano
Pincel fino de detalle
Spray sellador transparente
Lápiz

Guía paso a paso

1

Paso 1: Paint the base and sketch the diamond

Wash and dry your rock. Paint the surface white or pale. Let dry. Using a pencil and ruler, sketch a large diamond shape (square rotated 45 degrees) centered on the rock. Inside, draw lines from the corners to the center to divide the diamond into four triangular sections. Add additional parallel lines inside each section for a faceted gem effect.

2

Paso 2: Paint each triangular facet

Paint each triangular facet of the diamond a different shade of blue or teal. The top facet gets the lightest shade (sky blue), the side facets get medium blue, and the bottom facet the darkest navy. This graduation of tone mimics how light reflects off a real cut gemstone.

3

Paso 3: Add gold outlines

Using gold paint and a fine brush, carefully outline all the facet division lines and the outer edge of the diamond shape. These gold lines are like the metal setting of a gem — they define the geometric precision and add a luxurious touch. Work slowly and steadily for sharp, clean lines.

4

Paso 4: Add geometric corner decorations

In the corners around the diamond, add small geometric decorations using navy blue paint: tiny triangles, dots arranged in diamond patterns, or small cross shapes. These corner fillers extend the geometric theme across the whole rock surface.

5

Paso 5: Add white highlights and seal

Add a small bright white dot or triangle highlight near the top left of the diamond to suggest reflected light. This single highlight brings the gem to life and makes it look three-dimensional. Apply clear sealant when dry.

Paso 6: Agregar código RoxGeo

Escribe ROXGEO.COM seguido de una barra y el código único de tu piedra (ej. ROXGEO.COM/ABC123) en la parte inferior o trasera de tu piedra.

Consejos útiles

Esboza el diseño a lápiz antes de empezar a pintar.
Deja secar completamente cada capa antes de añadir la siguiente.
Elige una forma de piedra que se ajuste a tu diseño.
Sella con spray transparente para proteger tu piedra en exteriores.
Para el código RoxGeo en la parte trasera, usa un marcador permanente resistente al agua. Aplica 2-3 capas de barniz transparente encima.
Escribir #ROXCODE (ej. #ROXABC123) en tu piedra lo hace fácil de encontrar en Google.
La dirección completa ROXGEO.COM/CODE lleva al descubridor directamente al mapa de tu piedra.

¡Pinta esta piedra y rastrea su viaje con RoxGeo!

Descargar RoxGeo gratis