Materiais necessários

Pedra grande e plana
Tinta acrílica azul
Tinta acrílica verde
Tintas acrílicas variadas brilhantes
Tinta acrílica preta
Tinta acrílica branca
Pincel chato médio
Pincel fino para detalhes
Spray selante transparente

Guia passo a passo

1

Passo 1: Plan and sketch the peacock design

Wash and dry your large flat rock. With a pencil, sketch a peacock face and small body in the center-lower portion of the rock. Then sketch a large fan of tail feathers spreading outward and upward, filling most of the rock surface. Each feather should end in a large oval eye spot.

2

Passo 2: Paint the feather fan background

Paint the entire fan area with a base coat of teal or turquoise. While wet, blend touches of emerald green toward the edges and cobalt blue toward the center. This creates the iridescent shimmer of peacock feathers. Apply two coats for solid coverage.

3

Passo 3: Paint the eye spots on feathers

This is the signature feature of peacock feathers. For each feather tip, paint concentric ovals: the innermost is black, surrounded by a ring of gold, then a ring of teal or blue, then an outer ring of dark green. Add a tiny white highlight dot in the center of each black oval for brilliance.

4

Passo 4: Paint the peacock body and crest

Paint the small peacock body in the lower center with iridescent blue-green, using your cobalt blue and teal blended together. Paint a small fan crest on top of the head: a row of tiny circular-tipped feather spikes radiating upward from the head like a crown.

5

Passo 5: Add feather detail lines and seal

Using a fine brush and dark teal or black, draw thin radiating lines from the base to the eye spot on each feather. These lines suggest the barbs of real peacock feathers. Add gold outlines around each eye spot for richness. Once fully dry, apply clear sealant.

Passo 6: Adicionar código RoxGeo

Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.

Dicas úteis

Escolhe uma pedra cujo formato se adeque ao teu tema.
Esboça o design a lápis antes de começar a pintar.
Deixe cada camada secar completamente antes de adicionar a seguinte.
Sele com spray transparente para proteger a pedra no exterior.
Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
#ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.

Pinte esta pedra e rastreie sua viagem com RoxGeo!

Baixar RoxGeo grátis