วาดภูเขาไฟบนหิน
วัสดุที่ต้องการ
- หินทรงสูงรูปไข่
- สีอะคริลิกสีน้ำตาล
- สีอะคริลิกสีส้ม
- สีอะคริลิกสีแดง
- สีอะคริลิกสีดำ
- สีอะคริลิกสีเหลือง
- แปรงแบนขนาดกลาง
- แปรงเล็กสำหรับรายละเอียด
- สเปรย์เคลือบใส
คำแนะนำทีละขั้นตอน
ขั้นตอน 1: Prepare and sketch
Wash and dry your rock. A triangular or cone-shaped rock works best for a volcano. Use a pencil to divide the rock into sections: the mountain base (bottom two-thirds) and the eruption area (top third).
ขั้นตอน 2: Paint the mountain
Paint the lower portion of the rock with brown paint. Add darker brown or gray streaks along the sides to create depth and rocky texture. Blend the colors slightly where they meet for a natural look.
ขั้นตอน 3: Create the lava flow
Starting from the top of the rock, paint streams of red and orange flowing down the sides. Make the lava thicker at the top and thinner as it flows down. Add yellow highlights in the center of the lava streams for a glowing effect.
ขั้นตอน 4: Paint the eruption
At the very top, paint a bright explosion of yellow and orange bursting upward. Add small red and orange dots flying outward from the crater to represent volcanic debris. Use black to outline the crater opening.
ขั้นตอน 5: Add details and seal
Add smoke wisps with light gray paint above the eruption. Paint a few small rocks or boulders at the base using dark gray. Once fully dry, apply clear sealant to preserve your erupting volcano.
ขั้นตอน 6: เพิ่มรหัส RoxGeo
ที่ด้านล่างหรือด้านหลังของหินของคุณ เขียน ROXGEO.COM ตามด้วยเครื่องหมายทับและรหัสเฉพาะของหินของคุณ (เช่น ROXGEO.COM/ABC123) สิ่งนี้จะทำให้ผู้ที่พบสามารถไปยังหน้าประวัติของหินของคุณและบันทึกการค้นพบของพวกเขาได้โดยตรง หากหินมีขนาดเล็กเกินไปสำหรับที่อยู่ทั้งหมด ให้เขียน #ROX ตามด้วยรหัสโดยไม่มีช่องว่าง (เช่น #ROXABC123) — มันสั้น ง่ายต่อการค้นหาบน Google และนำไปยังหน้าการเดินทางของหินของคุณโดยตรง ใช้ปากกาแบบถาวรที่มีปลายเล็กหรือปากกาสีอะคริลิก และเคลือบด้วยน้ำยาล้างเงาใสเพื่อให้รหัสอ่านได้แม้ในฝน แดด และการผจญภัย
เคล็ดลับที่เป็นประโยชน์
- เลือกหินที่มีรูปร่างเหมาะสมกับธีมของคุณ
- ร่างดีไซน์ด้วยดินสอก่อนเริ่มระบายสี
- ให้แต่ละชั้นแห้งสนิทก่อนเพิ่มชั้นถัดไป
- เคลือบด้วยสเปรย์ใสเพื่อปกป้องหินเมื่อใช้งานกลางแจ้ง
- สำหรับรหัส RoxGeo ที่ด้านล่าง ใช้ปากกาถาวรที่กันน้ำ (เช่น Sharpie) หรือปากกาสีอะคริลิก ทาเคลือบใส 2–3 ชั้นเหนือรหัส — สิ่งนี้จะช่วยให้รหัสอ่านได้แม้ในฝน แดด และการสัมผัสเป็นเวลาหลายเดือน
- การเขียน #ROXCODE (เช่น #ROXABC123) บนหินของคุณทำให้ค้นหาได้ง่ายผ่านการค้นหาบน Google เราได้ทำการปรับแต่งสำหรับแฮชแท็กนี้อย่างต่อเนื่อง ดังนั้นใครก็ตามที่ค้นหาจะพบหน้าประวัติของหินของคุณได้อย่างรวดเร็ว
- ที่อยู่เต็ม ROXGEO.COM/CODE จะนำผู้ที่พบไปยังการ์ดของหินของคุณโดยตรง ที่ซึ่งพวกเขาสามารถดูประวัติการเดินทางทั้งหมด ผู้ที่พบก่อนหน้า และภาพถ่ายจากทุกจุดที่หินของคุณไปถึง
เพ้นท์หินนี้และติดตามการเดินทางของมันด้วย RoxGeo!
ดาวน์โหลด RoxGeo ฟรี










