Materiales necesarios

Piedra lisa y redonda (tamaño palma)
Pintura acrílica gris
Pintura acrílica negra
Pintura acrílica blanca
Pincel plano mediano
Pincel fino de detalle
Spray sellador transparente

Guía paso a paso

1

Paso 1: Sketch and base coat

Wash and dry your rock. Sketch a round cat face with two pointed triangular ears at the top. Paint the whole face and ears with your chosen base color (gray for a tabby, orange for a ginger cat). Apply two coats for solid coverage.

2

Paso 2: Paint the tabby stripes

Using a slightly darker shade of your base color, paint thin curved stripes on the forehead and cheeks, radiating outward from the center. These classic tabby M-shaped markings on the forehead are the most recognizable cat pattern. Add small stripes on the top of the head too.

3

Paso 3: Paint the eyes and nose

Paint two large almond-shaped eyes using green or yellow paint. Add vertical slit pupils in black. Paint a tiny pink triangle for the nose. Draw a small Y-shaped line below the nose for the mouth — two short lines going down and to the sides from the base of the nose.

4

Paso 4: Add whiskers and inner ears

Using white paint and the finest brush or a steady hand with a toothpick, draw four to six long whiskers on each side of the face, extending outward from the cheeks. Fill the inside of each ear with a pink or lighter shade to show the ear cavity.

5

Paso 5: Add highlights and seal

Add white highlight dots to the eyes. Add a white muzzle area — two small rounded bumps below and around the nose where the whiskers emerge. Once everything is dry, apply clear sealant. Your cat rock is complete!

Paso 6: Agregar código RoxGeo

Escribe ROXGEO.COM seguido de una barra y el código único de tu piedra (ej. ROXGEO.COM/ABC123) en la parte inferior o trasera de tu piedra.

Consejos útiles

Elige una forma de piedra que se ajuste a tu diseño.
Esboza el diseño a lápiz antes de empezar a pintar.
Deja secar completamente cada capa antes de añadir la siguiente.
Sella con spray transparente para proteger tu piedra en exteriores.
Para el código RoxGeo en la parte trasera, usa un marcador permanente resistente al agua. Aplica 2-3 capas de barniz transparente encima.
Escribir #ROXCODE (ej. #ROXABC123) en tu piedra lo hace fácil de encontrar en Google.
La dirección completa ROXGEO.COM/CODE lleva al descubridor directamente al mapa de tu piedra.

¡Pinta esta piedra y rastrea su viaje con RoxGeo!

Descargar RoxGeo gratis