Materiales necesarios

Piedra grande y plana
Pintura acrílica azul
Pintura acrílica verde
Pinturas acrílicas variadas y brillantes
Pintura acrílica negra
Pintura acrílica blanca
Pincel plano mediano
Pincel fino de detalle
Spray sellador transparente

Guía paso a paso

1

Paso 1: Plan and sketch the peacock design

Wash and dry your large flat rock. With a pencil, sketch a peacock face and small body in the center-lower portion of the rock. Then sketch a large fan of tail feathers spreading outward and upward, filling most of the rock surface. Each feather should end in a large oval eye spot.

2

Paso 2: Paint the feather fan background

Paint the entire fan area with a base coat of teal or turquoise. While wet, blend touches of emerald green toward the edges and cobalt blue toward the center. This creates the iridescent shimmer of peacock feathers. Apply two coats for solid coverage.

3

Paso 3: Paint the eye spots on feathers

This is the signature feature of peacock feathers. For each feather tip, paint concentric ovals: the innermost is black, surrounded by a ring of gold, then a ring of teal or blue, then an outer ring of dark green. Add a tiny white highlight dot in the center of each black oval for brilliance.

4

Paso 4: Paint the peacock body and crest

Paint the small peacock body in the lower center with iridescent blue-green, using your cobalt blue and teal blended together. Paint a small fan crest on top of the head: a row of tiny circular-tipped feather spikes radiating upward from the head like a crown.

5

Paso 5: Add feather detail lines and seal

Using a fine brush and dark teal or black, draw thin radiating lines from the base to the eye spot on each feather. These lines suggest the barbs of real peacock feathers. Add gold outlines around each eye spot for richness. Once fully dry, apply clear sealant.

Paso 6: Agregar código RoxGeo

Escribe ROXGEO.COM seguido de una barra y el código único de tu piedra (ej. ROXGEO.COM/ABC123) en la parte inferior o trasera de tu piedra.

Consejos útiles

Elige una forma de piedra que se ajuste a tu diseño.
Esboza el diseño a lápiz antes de empezar a pintar.
Deja secar completamente cada capa antes de añadir la siguiente.
Sella con spray transparente para proteger tu piedra en exteriores.
Para el código RoxGeo en la parte trasera, usa un marcador permanente resistente al agua. Aplica 2-3 capas de barniz transparente encima.
Escribir #ROXCODE (ej. #ROXABC123) en tu piedra lo hace fácil de encontrar en Google.
La dirección completa ROXGEO.COM/CODE lleva al descubridor directamente al mapa de tu piedra.

¡Pinta esta piedra y rastrea su viaje con RoxGeo!

Descargar RoxGeo gratis