Materiais necessários

Pedra plana e lisa (tamanho da palma da mão)
Tinta acrílica verde
Tinta acrílica preta
Tinta acrílica branca
Pincel fino para detalhes
Pincel chato médio
Spray selante transparente
Lápis

Guia passo a passo

1

Passo 1: Paint the dark background and plan the design

Wash and dry your rock. Paint the entire surface black or very dark green. Let dry. Print a Celtic knot reference image (a simple triquetra or interlace knot). Transfer the design by sketching it with pencil directly on the dark painted rock. Take your time — Celtic knots require precise planning.

2

Passo 2: Paint the knot ribbon strands

Using forest green paint and your fine brush, carefully paint the ribbon strands of the Celtic knot following your pencil lines. Celtic knots consist of continuous interlacing ribbons that loop over and under each other. Keep each ribbon about the same width throughout.

3

Passo 3: Create the over-under weaving effect

The most important part of a Celtic knot is showing which strand passes over and which passes under. At each crossing point, one strand is continuous and one is interrupted. Paint the "over" strand as a solid line, and leave a small gap in the "under" strand where they cross. Use slightly darker green in the gap areas.

4

Passo 4: Add highlights and shading to the ribbons

Using light green paint, add a highlight line along the center or upper edge of each ribbon strand. This shading suggests that the ribbons are three-dimensional bands, not flat lines. Use darker green for the shaded edges. Gold outlines along the ribbon edges add richness.

5

Passo 5: Add gold outlines and seal

Using gold paint and your finest brush, carefully outline the outer edges of all ribbon strands. This gold border makes the Celtic knot look like illuminated manuscript artwork. Apply clear sealant to protect your intricate Celtic design.

Passo 6: Adicionar código RoxGeo

Escreva ROXGEO.COM seguido de uma barra e o código único da sua pedra (ex. ROXGEO.COM/ABC123) na parte inferior ou verso.

Dicas úteis

Esboça o design a lápis antes de começar a pintar.
Deixe cada camada secar completamente antes de adicionar a seguinte.
Escolhe uma pedra cujo formato se adeque ao teu tema.
Sele com spray transparente para proteger a pedra no exterior.
Para o código no verso, use marcador permanente à prova d'água. Aplique 2-3 camadas de verniz.
#ROXCODE (ex. #ROXABC123) na pedra facilita a busca no Google.
O endereço completo ROXGEO.COM/CODE leva o descobridor diretamente ao mapa da pedra.

Pinte esta pedra e rastreie sua viagem com RoxGeo!

Baixar RoxGeo grátis